Get your VAT back + 15% discount on all items. (Coupon code: VAT+15%OFF)

Micro Servo - High Torque - Metal Gear

SKU: ZO-404
Manufacturer: Tower Pro
Model/MPN: MG90S
Availability: 2
50.72AED Ex Tax: 48.30AED
Qty: Add to Cart

Micro Servo - High Torque - Metal Gear


Add more power to your robot with this metal-geared servo. The tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. Of course, its not nearly as strong as a standard servo. Works great with the Motor Shield for Arduino, our 16-channel Servo Driver, or by just wiring up with the Servo library. Comes with a few horns and hardware.

To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE (see here for an example sketch). Position "0" (1.5ms pulse) is middle, "90" (~2ms pulse) is all the way to the right, "-90" (~1ms pulse) is all the way to the left.


  • Size : 22.8 x 12.2 x 28.5 mm
  • Voltage : 4.8V to 6V DC
  • Weight: 13.4 grams
  • Speed : 0.1 sec/60degrees (at 4.8V), 0.08 sec/60 degrees (at 6.0V)
  • Stall Torque : At 4.8V: 1.8 kg-cm / 25 oz-in. At 6.0V: 2.2 kg-cm / 30.5 oz-in


Brown = Black = Ground
Orange = Red = Positive
Yellow = White = Signal


Product pictures and description are of


Related Tutorials:

  1. How to setup Arduino with Motors and sensors
5 ( 5 / 5 )
Small and light weight but very powerful. Good for mini projects.
5 ( 5 / 5 )
Small but very good for any mini-projects you might want to do.
5 ( 5 / 5 )
its small, its light, its strong, its metallic,,,,,, ITS PERFECT!!! but comparelly with fewer horns -_-'''

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: