Want to start Innovating with Arduino, Raspberry Pi and Internet of things (IoT) ? Click here to learn about our July 2017 training

Level 3: Arduino and Wireless communication

SKU: ZO-1292
Manufacturer: Zero Ohm Electronics
Model/MPN: ZOWS1004
Availability: 10
250.00AED
Qty: Add to Cart

Level 3: Arduino and Wireless communication

Zero Ohm Arduino Workshops for Beginners

By: Zero Ohm Electronics

In collaboration with: Origin Base

The third level of our Arduino workshops is here! In this level, you will deal with wireless communication and learn about the different communication types. You will build your own remote control, RF technology and controls LED from your mobile. You will get the chance to unleash your inner inventor! You will also get the opportunity to see UAE’s first makerspace!

Level 3: Arduino and Wireless communication

Date & Time: Saturday, 22/07/2017 at 11:00 AM – 1:30 PM

Location: Origin Base HQ.

Objectives and Workshop Sequence:

The workshop would consist of three tasks as follows:

  1. An introduction about wireless communication, and the different ways devices used.
  2. Explanation and conducting the first experiment, where you’ll built a remote control to control the switching on and off of a LED.
  3. Explanation and conducting the second experiment, where you’ll Xbee wireless device to used send data.
  4. The last experiment will be controlling the switching on and off of a LED from a mobile application using Bluetooth technology.

Important Notices:

  • Price: 250 AED,

    Prepayment only (PayPal / Bank Transfer)

  • You can book your seat through our website (www.zeroohm.ae) or by visiting our store (location map).
  • Maximum number of attendees: 10
  • Minimum number of attendees: 4 (workshop will be cancelled if this condition is not metL).
  • Refund policy: Full refund if you cancel your attendance before 48 hours of the workshop start.
  • For any questions, place contact us on care@zeroohm.ae.

What you need to bring to the workshop is:

  1. Your personal Laptop and charger
  2. Your Sparkfun Inventor Kit (SIK) [if you don’t have one, please send an email care@zeroohm.ae so that we can secure one for you]
  3. Other required items will be provide by Zero Ohm during the workshop.
  4. Download and install the Arduino IDE from http://www.arduino.cc/en/Main/Software
  5. Install the FTDI Driver from : https://cdn.sparkfun.com/assets/learn_tutorials/7/4/CDM_v2.12.00_WHQL_Certified.exe

Follow the installation steps depending on your Laptop OS:

This workshop does not require previous knowledge of electronics. The workshop will be conducted by experts that have years of experience in electronics and prototyping.

The workshops will be held in OriginBase Makerspace (click here for location).

There are no reviews for this product.

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: