FTDI Basic Breakout - 5V

SKU: ZO-161
Manufacturer: Sparkfun
Model/MPN:
Availability: 11
60.00AED
Qty: Add to Cart

FTDI Basic Breakout - 5V

Description:

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.

The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.

This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.

This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector.

One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V.

Note:

This module uses a Mini-USB connector


Documents:

[Porduct pictures and description courtesy of Sparkfun.com]

Related Tutorials:

  1. ESP8266 WiFi Controlled Home Automation

 

on
5 ( 5 / 5 )
Used it to connect with my Arduino Pro Mini during my final year project. Pretty efficient!
on
4 ( 4 / 5 )
Hello Anton, thanks for the feedback. I have included this info as a note on the description
on
4 ( 4 / 5 )
Keep in mind, this one is Mini-USB, not Micro-USB, as I expected. So, as I, you might need an additional cable.

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: