Piezo buzzers are used for making beeps, tones and alerts. This one is petite but loud! Drive it with 3-30V peak-to-peak square wave. To use, connect one pin to ground (either one) and the other pin to a square wave out from a timer or microcontroller. For the loudest tones, stay around 4 KHz, but works quite well from 2KHz to 10KHz. For extra loudness, you can connect both pins to a microcontroller and swap which pin is high or low ('differential drive') for double the volume.
|Tutorials on the Adafruit Learning System featuring this product:|
|Adafruit Trinket-Modded Stuffed Animal|
Use Trinket as a platform to make animals come alive - you chose the animal
|Secret Knock Activated Drawer Lock|
Unlock a drawer by knocking a secret pattern.
|Trinket / Gemma IR Control|
Use a Trinket or Gemma to determine the IR codes from your remote and use the codes in your own program to trigger events
|Trinket / Gemma Mini-Theramin|
Make music with tiny microcontrollers and varying light levels
|Low Level Magstripe Reader|
|Wearable Piezo Tones with Flora|
Make your clothes play a song
|Arduino Lesson 10. Making Sounds|
Learn Arduino, Lesson 10. Making Sounds
Product pictures and description are of Adafruit.com