Have you seen our new promotions? 15% flat discount on over 180 products!! Click here to see the items!

NTSC/PAL (Television) TFT Display - 2.0" Diagonal

-15%
SKU: ZO-409
Model/MPN:
Availability: 3
161.00AED 136.85AED
Qty: Add to Cart

NTSC/PAL (Television) TFT Display - 2.0" Diagonal

Description:

Yes, this is an adorable miniature television! The visible display measures only 2.0" diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-15VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voila, a television display! There's a little button to adjust the LED backlight brightness (5 levels) - there is no other adjustment available but we found that the color and contrast look great right out of the box.

To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any analog composite-video output such as a YBox or Propeller w/Video out. It will not work with a device that only outputs VGA, HDMI or any other digital video signal.

Please note, these miniature displays are very delicate and require care to avoid ripping the delicate flex connector. These are best used by electronics geeks who have experience and are comfortable working with delicate electronic components. WE CANNOT REPLACE DAMAGED DISPLAYS if you are not careful and rip the flex connector!

Specifications:

  • Power with 6-15VDC only into onboard buck converter
  • 50mA power draw at 12V, 120mA at 5V
  • Control board measures 48mm x 32mm
  • Four 3mm drill holes on a 43mm x 28mm square
  • Visible display dimensions: 40.672mm x 30.48mm
  • Resolution: 320 x 240
  • Dot Pitch: 0.0635mm wide x 0.127mm high
  • Display metal case dimensions: 46.1mm x 40.96 x 2.53mm

Here are some specs for the raw TFT display panel itself

 

Tutorials:

Tutorials on the Adafruit Learning System featuring this product:

Game Grrl
A portable Nintendo game
Using a Mini PAL/NTSC Display with a Raspberry Pi
Use a tiny composite video display with a Raspberry Pi
Pi Video Output Using pygame
Add a video display to your Pi!

References:

Product pictures and description are of Adafruit.com

 

 

 

 

 

There are no reviews for this product.

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: