Arduino Pro Mini 328 - 5V/16MHz

SKU: ZO-125
Manufacturer: Sparkfun
Model/MPN: DEV-11113
Availability: 6
Qty: Add to Cart

Arduino Pro Mini 328 - 5V/16MHz

First of all, it’s a 5.5V Arduino that runs the 16MHz boot loader, you can solder in any connector or wire with any orientation you need using it. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC, The latest and greatest version of this board breaks out the ADC6 and ADC7 pins as well as adds footprints for optional I2C pull-up resistors! We also took the opportunity to slap it with the OSHW logo.

Now available in Dubai, UAE, Oman, and Qatar!

Dimensions: 0.7x1.3" (18x33mm)


  • ATmega328 running at 16MHz with external resonator (0.5% tolerance)
  • 0.8mm Thin PCB
  • USB connection off board
  • Supports auto-reset
  • 5V regulator
  • Max 150mA output
  • Over current protected
  • Weighs less than 2 grams!
  • DC input 5V up to 12V
  • On board Power and Status LEDs
  • Analog Pins: 8
  • Digital I/Os: 14


0.7x1.3" (18x33mm)
< 2g
0.7" (18mm)
1.3" (33mm)
Input Range
5V up to 12V
Max IO Pins
8 (Analog) 14 (Digital I/O)
There are no reviews for this product.

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: