Take a look at our 3d printing and laser cutting training here! Click here!

Vibrating Mini Motor Disc

SKU: ZO-743
Model/MPN:
Availability: Sold Out! [Login for more info and to get notified]
10.00AED
Qty: Add to Cart

Vibrating Mini Motor Disc

Two wires are used to control/power the vibe. Simply provide power from a battery or microcontroller pin (red is positive, blue is negative) and it will buzz away. Works from 2V up to 5V, higher voltages result in more current draw but also a stronger vibration.

If you want to reduce the current draw/strength (for example, to control it directly from an Arduino pin) try putting a resistor (100 to 1000 ohms) in series. For full power control, a small PN2222 transistor can control a motor easily, some experimentation may be required!

TECHNICAL DETAILS

  • Dimension: 10mm diameter, 2.7mm thick
  • Voltage: 2V - 5V
  • 5V current draw: 100mA, 4V current draw: 80mA, 3V current draw: 60mA, 2V current draw: 40mA
  • 11000 RPM at 5V
  • Weight: 0.9 gram

 

There are no reviews for this product.

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: