Get your VAT back + 15% discount on all items. (Coupon code: VAT+15%OFF)

Level 2: 3D Scanning and Maintenance of 3D printers

SKU: ZO-1394
Manufacturer: Zero Ohm Electronics
Model/MPN: ZOWS1007
Availability: 10
525.00AED Ex Tax: 525.00AED
Qty: Add to Cart

Level 2: 3D Scanning and Maintenance of 3D printers

Zero Ohm 3D Printing Workshops for Beginners

By: Zero Ohm Electronics

You have probably heard about 3D printers and their ability to create “anything you want”! Or you might be an owner of a 3D printer but need a little help kick starting your 3D printing adventure. With this workshop, you can get a grasp of 3D printing and its possibilities. You will learn how to setup 3D printers, identify their materials, prepare 3D models for printing, and print! In the more advanced level, you learn how to perform routine maintenance on your printer and how to identify and troubleshoot common 3D printer problems. Plus you will get a brief introduction about 3D scanning.

Level 2: 3D Scanning and Maintenance of 3D printers

Prerequisites: Level 1: Getting started with 3D printing

Date & Time: 23/12/2017 from 2 PM till 6 PM.

Location: Origin Base HQ (location map)

Objectives and workshop sequence:

  1. A brief introduction about the required routine maintenance for 3D printers
  2. An explanation of the different required maintenance tasks including: bed leveling, lubrication, replacing build plate tape, cleaning the extruder, etc..
  3. Understanding common faults and how to troubleshoot them including: extruder jams, failed adhesion, stripped filament, etc..
  4. Explaining the basics of 3D scanning
    1. Types of 3D scanners
    2. The basics of the process of 3D scanning
    3. Using 3D scanned models

Important Notices:

  • Price: 500 AED.

    prepayment only (PayPal / Bank Transfer)

  • You can book your seat through our website ( or by visiting our store (location map).
  • Maximum number of attendees: 10
  • Minimum number of attendees: 4 (workshop will be cancelled if this condition is not met).
  • Refund policy: Full refund if you cancel your attendance before 48 hours befor the workshop start.
  • For any questions, place contact us on

What you need to bring to the workshop:

  1. Your personal laptop and charger
  2. Download and install Makerware and Flashforge (Flashforge for the Creator Series)


Please note that the workshop will not go through the 3D modelling process, but rather how to prepare an already made 3D model for 3D printing.

There are no reviews for this product.

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: